Privet

Ligustrum spp. 

Privet

More Images and Information

Download a Recognition Card:

Ligustrum lucidum (PDF 1.1 MB)

Ligustrum sinense (PDF 789 KB)


Introduction

There are about 50 species of Ligustrum, all native to Europe, North Africa, and Asia.  Ligustrum has been developed into an assortment of ornamental varieties in the U.S. and other parts of the world.  In 1852, privet was introduced to the United States for use as an ornamental shrub and is still commonly used as a hedge. Because of Ligustrum’s ability to tolerate air pollution and other poor environmental conditions, it was regarded as a great landscape plant and planted extensively. Unfortunately, this was before its invasive characteristics were discovered. Establishment of privet in many natural areas of Florida has occurred through its escape from cultivation. Glossy privet (L. lucidum) is listed as a Category II species with the potential to disrupt native plant communities in Florida by the Florida Exotic Pest Plant Council. Chinese privet (L. sinense) is a Category I species that is currently disrupting native plant communities in Florida.  

back to top

 

Description

Ligustrum spp. are perennial shrubs that can grow up to 16 feet in height. Ligustrum bark is tan to gray in color with a smooth texture. Leaves are elliptic to ovate in shape, oppositely arranged on twigs. Flowers have both male and female parts. Each flower has petals fused into a tube with four separate lobes. Flowers are borne on small panicles on short lateral branches on the end of the twig. The oblong, blue/black fruit is a drupe containing 1 to 4 seeds. Fruit clusters persist through the winter. Mature trees can produce hundreds of fruit.

L. lucidum (glossy privet) is a large shrub or tree that grows to 30 feet in height, with spreading branches. Leaves are ovate to somewhat lanceolate and 3 to 5 inches long. L. sinense (Chinese privet) is smaller than glossy privet, growing to only 20 feet in height. Leaves are elliptic to somewhat oblong, 1 to 3 inches long, and pubescent on the midrib below.

Ligustrum spp. grows readily from seed or from root and stump sprouts. Wildlife can aid in the dispersal of the seed, often relocating the plant over long distances.

back to top

 

Impacts

Ligustrum spp. is capable of invading natural areas such as floodplain forests and woodlands. The aggressive nature of privets allows for the formation of dense thickets that out compete desirable plants. The amount of seed produced by privet is another mechanism for its prolonged survival. Even though privet is still used in the landscape and available for purchase at garden centers and online distributors, it is an invasive weed and should be treated as such.

back to top

 

Management

Ligustrum spp. control methods include mechanical controls such as mowing and cutting, physical control such as seedling removal and burning, and chemical control such as herbicide application. Herbicide control measures include foliar spraying in late autumn or early spring with glyphosate, triclopyr, or metsulfuron; cut stump applications using glyphosate or triclopyr; and basal bark applications of triclopyr.

back to top

 

Preventative:

The first step in preventative control of privet is to limit planting and removal of existing plants within the landscape. If possible, removal should occur before seeds are produced. Since seeds remain on the plant for several months, care must be exercised to prevent seed spread and dispersal during the removal process. 

back to top

 

Cultural:

Plant native or non-invasive alternatives.  Avoid large disturbances that allow for invasive species to colonize.

back to top

 

Mechanical:

For smaller infestations or areas where herbicide applications are not feasible mowing and cutting are appropriate. Stems should be cut as close to the ground as possible at least once per growing season. Mowing and cutting will not eradicate Ligustrum spp., but it will provide some level of management.  Continuous mowing will work, but frequency is key.

back to top

 

Physical: 

Hand pull young seedlings and small plants. Larger plants may need to be dug out. Plants should be pulled as soon as possible, before they produce seeds. The entire root must be removed to prevent resprouting.

 

Biological:

Ligustrum spp. has no known biological control agents.

back to top

 

Chemical:  

Foliar applications of glyphosate or cut-stump applications of triclopyr or glyphosate are effective. Stems <0.5 inch diameter are susceptible to basal bark applications of 20% triclopyr-ester (Remedy) in oil.  Larger stems must be notched or frilled.

Foliar sprays are effective for dense thickets of Ligustrum. Care must be taken to avoid non-target plants.The ideal time to treat is while plants are in leaf in late autumn or early spring but when many native species are dormant.  Triclopyr at 1-2 quarts broadcast rate per acre or 2% solution are recommended.

The cut stump method should be considered when treating individual shrubs. Immediately after cutting stems at or near ground level, apply a 25% solution of glyphosate and water or triclopyr and water to the cut stump, being careful to cover the entire surface. Effectiveness of the herbicide is increased if holes are cut in the top of the freshly felled stump.

The basal bark method consists of a mixture of 25% triclopyr and 75% horticultural oil applied to the basal parts of the shrub to a height of 12 to 15 inches from the ground. Thorough wetting is necessary for good control; spray until run-off is noticeable at the ground line.

back to top

Helpful Notes:

Surfactant – 0.25% is the standard rate for all foliar herbicide applications, 2 teaspoons per gallon.

Dry time – generally 4-6 hours is adequate, but the longer the better for glyphosate

Pay particular attention to herbicide labels near wetlands or bodies of water.

The use of trade names in these publications is solely for the purpose of providing specific information. UF/IFAS does not guarantee or warranty the products named, and references to them in this publication does not signify our approval to the exclusion of other products of suitable composition. All chemicals should be used in accordance with directions on the manufacturer's label.

back to top

 

References and Useful Links:

Invasive and Exotic Species of North America

University of Florida Center for Aquatic and Invasive Plants

University of Florida’s Cooperative Extension Electronic Data Information Source

Langeland, K.A. and K. Craddock Burks. 1998. Identification and Biology of Non-Native Plants in Florida's Natural Areas. IFAS Publication SP 257. University of Florida, Gainesville. 165 pp.

The Plant Conservation Alliance's Alien Plant Working Group. Weeds Gone Wild: Alien Plant Invaders of Natural Areas

Pacific Island Ecosystems at Risk (PIER). Plant Threats to Pacific Ecosystems

Invasive Plants of the Eastern United States

USDA Natural Resources Conservation Service. Plants Database: http://plants.usda.gov
Batcher, M.S. 2000. ELEMENT STEWARDSHIP ABSTRACT for Ligustrum spp. Privet. The Nature Conservancy. Consulting Ecologist and Environmental Planner, 1907 Buskirk-West Hoosick Road, Buskirk, NY.

Tennessee Exotic Pest Plant Council

back to top


Invasive Plant Management - Florida Fish and Wildlife Commission

Contact Us:CAIP-education@ufl.edu
Center for Aquatic & Invasive Plants | 7922 NW 71st St. | Gainesville, Fl. 32653 | 352-392-1799
Copyright 2007 University of Florida